EAW DX 810 Matrix Mixer and Processor

$169.99 $129.99

Categories: ,


Mackie’s DX810 is a DSP-based digital audio mixer and signal processor. It is designed for use in a variety of installations such as churches, courtrooms, convention centers, and hotels. It provides eight balanced mic/line inputs and ten balanced outputs allowing true 8×10 mixing.

Dual RS232 ports

Mute and solo functions
LED level indicators
32 control and mute groups
24 presets
10 logic I/Os
DSP includes 1/3-octave graphic EQ, 8-band parametric EQ, delay, compressors, gates, and
crossover filters

EAW DX810 Specs

Maximum Input Level +18 dBu
Input Impedance Mic: 1.3 k ohms
Line: 40 k ohms
Other: 10 k ohms or Greater
Maximum Output Level +18 dBu
Output Impedance 120 ohms
Frequency Response 20Hz – 20kHz
Total Harmonic Distortion (THD) < 0.005% (Mic In to Master Out)
Crosstalk < -90dB
Common Mode Rejection Ratio Better than 80dB @ 1kHz
Inputs 8 x Mic-Level Phoenix-Type Connectors
10 x Line-Level Phoenix-Type Connectors
Outputs 2 x 3-Pin Phoenix Connectors
1 x 24-Pin Phoenix Connector
1 x RS-232 9-Pin D Connector
2 x RCA Connectors
1 x 15-Pin D Connector
Other Ports 1 x AC Input
1 x 24VDC Input
2 x RS-232 9-Pin D Connectors
1 x 25-Pin D Connector for Logic I/O
1 x 3-Pin Phoenix Connector for Remote Control
Controls 1 x Power Switch
8 x Phantom Power Switches
8 x Input Trim Knobs 1 x Mode Select Button
24 x Gain Control Buttons
Indicators 13 x 12-Segment LED Level Meters
3 x Mode Status LEDs
Phantom Power +48VDC
Power 90-240 VAC, 50/60Hz, 1.0A
Dimensions (HxWxD) 3.5 x 19 x 13.25″ (89 x 483 x 337 mm)
Weight 12.9 lbs (5.9 kg)
Specialties Signal Processing Includes EQ, Delay, High and Low Pass Filters, and a Compressor/Limiter